Directional Button Feature

(Control Head - O9, Directional Buttons)

Selects the function for the Mobile O9 Control Head Directional Buttons, when used in conjunction with a Universal Relay Controller (URC). These selections apply while operating in Conventional or Trunking communications mode, as noted in the table below.

You cannot duplicate the same Relay Pattern on more than one Directional Button, Top Function Programmable Button, or Bottom Function Programmable Button "Index" selection; however, Relay Patterns assigned to one of these programmable buttons can be duplicated on a Keypad Button.

If the Universal Relay Controller Equipped field is "Enabled" and the URC is not connected at power-up, or is disconnected while the radio is on, then pressing a Directional Button configured for a Relay Pattern causes the radio to sound a bad "bonk".

Button Selections:	This selection is only valid in the CPS, and/or available to the RADIO-USER:
Blank	(Intended for functions that are not in use.)
Relay Pattern	When the Universal Relay Controller Equipped field is enabled. Once selected, the Directional Button Index for the same record / row must also be defined.
Third Party	When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.
Unprogrammed	When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.

Go to the Directional Buttons Page